Freesat No Signal Being Received

The last thing that you want to see when you turn on your TV to watch your favourite program is the ‘Freesat No Signal’ error. The issue could be coming from either the Freesat, or something within your own home, and this is something that you will need to get to the bottom of.

Unfortunately, there could be various different things that are causing the problem, and the only way to find out what it is would be to try lots of methods of fixing it. Not only will this help you to find out what is not the problem, but it eventually will lead to a solution.

So, if you are facing the Freesat no signal message on your TV, don’t worry. There are lots of things that you can do to figure out what has gone wrong and take the necessary steps to fix it.

We are going to provide you with an in-depth list of troubleshooting options to help move the process along and get your TV working again in no time.

Freesat No Signal Being Received On Humax/Manhattan Box

Before we get into troubleshooting the problem at hand, you should be aware of a few things first. The first of these things is that extreme weather conditions, like strong rain and winds, or snow, can affect that signal of the satellite, which could be the reason that you have no signal.

If this is the case for you, and you cannot find a solution, it might be worth waiting for the weather to pass before you panic. If you are still experiencing issues, then we recommend that you try some of the solutions in this article.

How to Solve the Freesat No Signal Message

Before you go and waste endless amounts of time on the phone to customer services, there are some things that you can try at home to fix the problem. They are not guaranteed to work, but it is certainly worth a try. We will leave some things for you to try below.

Is Your Box Turned On?

This might sound like something obvious that you will have already checked, but we are only human, and sometimes it is the obvious things that are staring us in the face that we miss.

So, you should first double-check that your box is on and that it is connected to the power cord properly. You should also check that the box has not gone into standby mode, and that the cable hasn’t accidentally been knocked loose without you realising.

Are There Any Signs of Damage?

Through general wear and tear, cables can often become worn, frayed, or damaged. If this does happen, it will not be able to supply power, so you will need to check to see if this is the case.

If you are removing any wires that have been exposed from the covering, make sure to turn the power off first. Any damaged cables will need to be replaced, as it is likely that they are causing the problem.

You should also check that the cables like the HDMI, TV, and box cables are all in the right places and are connected correctly. It might also be helpful to push in any cables gently to make sure that they have not come loose.

Is Your Satellite Dish Aligned?

Extreme weather conditions can change the alignment of your satellite dish, as well as some other occurrences. If the alignment of the dish is out, then you are probably going to face low or no signal issues.

You can actually align the dish into the correct position by moving it left and right until the TV comes back on. It can be helpful to have someone watch the TV while you go out and move the dish to save time.

They can tell you when you have got the right spot. It is best to take your time while doing this as there might be a slight delay, so make small adjustments until you get it just right.

Wireless Interference

Something that you might not have known is that wireless equipment can sometimes disturb the strength of the signal and start to cause complications.

Anything from baby monitors to cordless phones can do this, which is why you should try to keep your box away from any wireless devices. If your box is near a wireless device, you should move them away from each other to see if this helps the problem.

Have You Selected the Right Input?

One of the most common issues that people have is that they have not selected the right input for their TV. You may have accidentally pressed the wrong one or switched without realising.

Thankfully, this is an issue that is really simple and easy to solve. All you have to do is use your TV remote and press the button that says either AV, source, or input.

When you have pressed this button, you will need to select AV/HDMI or video mode, depending on the box that you have. If you are unsure, try out all of the available options until you find the right one.

Blocked Signal

Sometimes, there can be something that is blocking your dish and preventing it from getting the right signals. Some of the obstructions in the way could be things like trees, and you might need to remove these obstructions to allow your box to receive the right signal.

However, you should be absolutely sure that nothing else works if this is something that is going to be difficult.

For example, you don’t want to spend time, effort and money on removing a huge tree only to find that it wasn’t causing the issue in the first place. Alternatively, it might be possible for you to move the dish itself, rather than the thing that is blocking it.

LNB Interference

If your satellite dish has been exposed to weather conditions that could have caused some damage, then it could be possible that the LNB has been damaged.

If this is the case, you are going to get either poor or no signal. It can also cause you to miss out on certain channels that have now disappeared. The best way to fix this would be to change the LNB.

Manhattan Freesat No Signal

You can fix your Manhattan Freesat box error message by using any of the methods that we have mentioned above to try and solve the problem.

However, as well as this, you can manually check the cable connections between the dish and SX, carry out a signal check, and configure the SCR settings if you are prompted to do so.

Humax Freesat No Signal

You can fix your Humax box error message by:

  • Ensuring that all the cables are in the correct place
  • Replacing any damaged or old cables
  • Changing the alignment of the dish for a better signal
  • Changing the LNB or increasing the LNB voltage
  • Using a signal amplifier to boost the signal
  • Getting a larger dish that will do the job more efficiently

What if This Doesn’t Work?

If you are still experiencing issues after following all of these methods, then you should contact your provider for more information.

Was this article helpful?

Yes No

How can we improve it?


We appreciate your helpul feedback!

Your answer will be used to improve our content. And you can help other readers too 🙂

Follow us on social media:

Facebook Pinterest
About S. Santos

👋 I'm a technology columnist and blogger with over 10 years of experience, currently serving as Blue Cine Tech's AV Editor. Specialising in gadgets, home entertainment, and personal technology, my work has been featured in top technology blogs. I'm dedicated to breaking down the complexities of the latest tech trends, from explaining the intricacies of Dolby Vision to optimising your streaming experience. This blog serves as a platform for my ongoing exploration of the ever-evolving tech landscape. If you see me at industry events like CES or IFA, feel free to say hello.

Leave a Comment