Convert normal wired speakers to wireless with these rear speaker kits
So you have a set of old wired speakers, and you’re wondering if there’s a way to convert them to wireless. You want to be able to stream music to them from your phone, laptop, or tablet.
Can I Convert Old Wired Speakers to Wireless?
You can convert old wired speakers into wireless by using add-on adapters or wireless rear speaker kits. You just have to plug the audio cable into the adapter, and from there you can connect to the adapter via Bluetooth.
Of course, it’s challenging to figure out which wireless audio adapter is right for your speakers.
Best Wireless Audio Adapters / rear speaker kits:
Here’s a list of our recommend wireless audio adapters. You can use these to convert old speakers into fancy wireless speakers. No need to buy expensive Bluetooth speakers!
How to Convert Normal Wired Speakers to Wireless
The best way to convert normal wired speakers to wireless is by using Bluetooth audio receiver. The process will vary slightly depending on the speakers you wish to convert and the ports you need to use.
Most speakers, by far, use a simple aux cable or 3.5mm cable. Connecting the Bluetooth adapter via this method is super simple. You just need a female to female 3.5mm cable and you’re good. Most wireless speaker kits include the needed cable in the box, so no need to worry.
Now, if your speakers do not have an aux port, they probably use RCA ports. That’s where the above products will come into the picture. You need a Bluetooth audio receiver that has two RCA ports for audio.
Another option: some stereo systems will have an extra USB port that you can use with a USB Bluetooth adapter. These adapters are very cheap because they don’t have any other ports, it only USB. And USB can usually provide some power, so no need for external power.
Keep in Mind
A couple of pointers to keep in mind. For starters, most Bluetooth receivers require external power, so make sure you have space for an extra cable. While some have internal batteries, the charge usually doesn’t last for a long time.
Secondly, I don’t recommend going for the cheapest receivers. There are lots of off-brand receives that break down or run into issues after a few uses. It’s always best to go with a trusted brand, such as Logitech.
I also recommend looking for a Bluetooth wireless speaker kit that uses Bluetooth 4.1 or newer because it’ll save you the hassle of pressing the pair button every time. You just have to search for the device and connect, it will automatically remember the devices and switch to the appropriate one.
So now you know how to convert an old set of dusty wireless speakers into wireless speakers. The process is very simple but you do need to use the right adapter. For more powerful speakers, you might need to purchase a Bluetooth receiver with a Bluetooth amplifier. However, most simple Bluetooth receivers should work fine. That’s how you convert old speakers into wireless speakers.