Hisense TVs are popular on the market thanks to their great picture quality and affordable prices. However, Hisense TVs have some problems that may annoy you. One such issue is that your TV blinks red, indicating a software or hardware error.
If you are one of those affected by the red light blinking problem on Hisense TV, do not worry, as we are here to help. We have gathered all the possible fixes for your problem in the section below.
Why Is Your Hisense TV Red Light Blinking?
The blinking red light indicates your Hisense TV has detected a software or hardware error. Some causes include:
- Damaged power supplies or cables.
- Outdated firmware.
- Signal issues or HDMI glitches.
We published a comprehensive guide on Hisense TV blinking codes. This in-depth article covers the blinking patterns and their meanings and provides detailed explanations and step-by-step solutions to help you troubleshoot any issues you may face. If you’re interested in learning more about blinking codes and how to address them, we highly encourage you to check out the full article for a wealth of helpful information.
How to Fix The Red Blinking Light On Your Hisense TV
There are several ways to fix your Hisense TV that flashes the red light. Before bringing your TV for repair, try the below solutions.
Method 1: Restart Your TV
One of the most straightforward fixes is to restart your TV. Performing a restart should clear all the bugs and glitches, thus fixing the red light blinking issue. Here is how to do it.
- Press the Power button until your TV powers off.
- Unplug your TV from the power source and wait for 60 seconds.
- Plug the TV back in.
Method 2: Check Your Wall Outlet
Consider checking your surge protector and wall outlet if the reboot does not fix the red blinking light error. Here are the steps.
- Plug your Hisense TV into a different power outlet.
- If your TV turns on, you will need a new surge protector or fix the outlet.
Method 3: Soft Reset Your Hisense TV
If the problem persists, then try performing a soft reset. This is different from restarting your TV mentioned in method 1.
- Make sure all connected devices are removed.
- Unplug your TV from the power outlet.
- Keep the Power button pressed for at least 30 seconds to drain any residual power.
- Wait for 15 minutes and plug your TV back on.
Method 4: Update the Firmware
Outdated firmware may cause your TV’s red light to flash. So, ensure that your TV is up-to-date to avoid any bugs or glitches. Here is how to update your TV.
- Open Settings on your TV and then go to Support or About.
- Select System Update and choose Check Firmware Upgrade.
- Click On Upgrade.
Method 5: Factory Reset
If none of the above solutions work, perform a factory reset. Doing so will remove all configurations and software errors on your TV. Here are the steps.
For older Hisense TVs:
- Press the EXIT key on your remote.
- Wait for 15 seconds and click OK.
- Turn off your TV.
For newer Hisense TVs (2014 or later):
- Press Menu on your remote and select Support > Enter. On some models, choose OK or Select.
- Head to Self Diagnosis > Enter > Reset.
- Enter your TV’s pin to confirm your action.
