HDMI maximum Length: How Far Can an HDMI Cable Go?

HDMI cables are a popular way to connect devices for high-definition video and audio. But how far can an HDMI cable go? What’s the maximum length? In this article, we’ll explore the maximum length of an HDMI cable and what factors influence it. We’ll also dispel some myths about HDMI cables and their performance at certain lengths. So, read on to learn everything you need to know about HDMI cable length!

How Long Can An HDMI Cable Be?

Today, HDMI cables can reliably run up to about 50 feet (15 meters) before signal degradation becomes an issue. This is what the experts recommend. You can find 100 feet cables being sold (30 meters), but know that the picture quality will likely not be as good as a shorter cable. As this website pointed out, there’s no way to guarantee that a 50-foot cable will work with your device. Because various devices respond differently to signal loss, it’s impossible to predict whether a 50-foot cable would function; all we can say for certain is that it will with most gadgets.

Is there a Maximum Length 4K and 8K?

The HDMI Licensing Administrator claims that “All certified cables of any length must pass certification testing at an HDMI Forum Authorized Testing Center (Forum ATC). This means that any cable being sold bearing the HDMI logo, regardless of length, is tested to ensure it meets the performance specifications for an HDMI cable.” This means that the length being sold with a certification logo (see below) has been tested to pass the HDMI 2.1a features including uncompressed 8K at 60Hz 4K at 120 Hz and bandwidth capability supports up to 48Gbps.

Credit: hdmi.org

This 45 feet cable probably longest certified high speed cable that is available in the market. The reviews for this product claim that it does support all of the HDMI 2.1 features including HDR, eARC and VRR.

How Can I Tell If There Are Any Issues?

When it comes to cables, one of the most common mantras is, “It either works, or it doesn’t”. Sometimes, it’s not that simple. In some cases, a long cable will just be unreliable.

An HDMI cable can still work over long distances, but you might run into graphical artefacts, a loss of brightness, input lag, a low refresh rate, and other issues. When you start encountering those issues, you can bet that the cable is running into issues.

Basically, what happens is the cable sends the information that it can, which isn’t always the information that you’re expecting to receive. It’s pushing through 1s and 0s but sometimes not all the packets can make it to the end-point.

In simple terms: the further the signals have to travel, the weaker they get.

What is the Maximum Reliable Length?

While there are many different types of HDMI cables, most of them start to encounter signal degradation around the 15-meter mark (50 feet). To push it further, you’ll need the help of extra tools and cables, which we’ll talk about in the next section.

Another thing to keep in mind is that sharp bends can degrade the signal further. In short, if you’re planning to run an HDMI cable through your home, the end result might be either a completely blank screen, or a low-quality image.

There are a few solutions to that problem.

How Can I Extend The Length?

If you’re sure the length is causing signal degradation, then there are a few steps you can take to boost the signal distance.

Use a Signal Booster (Repeater)

One option would be to buy a small device called an HDMI signal booster, also known as an HDMI repeater. What these devices do is, in simple terms, add more power to the cable, to boost the digital signal. The devices strengthen the HDMI digital signals. They have an HDMI input and output, and an external port for power, usually micro-USB.

What you do is plug the signal booster into a power source, and then plug an HDMI into either end. These signals can boost the usable distance of cables.

One tip to remember is you need to add them to a section where the signal is still clear, it won’t be able to boost a low-quality signal. The effectiveness of the repeaters varies, but it usually falls within 10 to 15 meters.

For example, you can run a 15-meter cable from your computer to repeater, connect another 15-meter cable to that repeater, and finally to a display. This solution works okay for outdoor projectors or digital signage.

Use HDMI to Cat5 or Cat6 Adapters

To extend an HDMI cable, another option is to use a Cat5 or Cat6 cable. This option isn’t the best because you need two Cat cables to transfer the signal from one HDMI cable. That creates a lot of cables. I would only recommend this if you already have Cat cables lying around that are not in use.

But if you absolutely need to send an HDMI signal over Cat cables, then you can buy HDMI to Cat adapter. It’s a little tricky to get working and you need two long-distance Cat cables, but it can work.

Fibre Optic HDMI Cables

Regular copper HDMI cables have a number of limitations, such as the distance signals can transfer without losing data. However, there’s another type of HDMI cable made from fibre optics.

The technology is quite different. Regular HDMI cables transmit electricity through copper, while optical cables transmit light waves through fibre-glass. You probably already guessed which one can transfer data further.

Active Fibre optic HDMI cables (AOC) can carry digital information much further than copper HDMI cables, and they have great protection against outside interference too. Another reason people prefer these HDMI cables is that the wires are more flexible, so they’re easier to install and cable manage.

Most people also report that fibre optic cables, when compared to the usual copper ones, transmit clearer images with more colour, at the same lengths. Generally, with fibre optic HDMI, the signals are much stronger and can be pushed further because the technology doesn’t allow the signal to degrade. While there are many pros to using fibre optic HDMI cables, there are also some downsides too.

What’s the Maximum Length for a Fibre Optic HDMI Cable?

It’s unclear what the maximum range of fibre optical HDMI cables is because most merchants sell them in specific bundles, from 3-ft to 200 ft. Technically, fibre optic cables can run for miles, maybe 40 to 60 miles, but most manufacturers won’t make HDMI cables in those lengths. Generally, fibre optic HDMI has almost no signal loss over distance.

The effective range is much better than regular HDMI cables, which start to run into issues around the 50 ft mark. So if you need to run an HDMI cable over a long distance, fibre optic is definitely the best, albeit expensive, choice.

The Downsides to Fiber Optic HDMI Cables

Before you go ahead and buy a fibre optic HDMI cable, there are a couple of things you need to know. For starters, they’re a bit more expensive than regular HDMI cables, especially certain brands.

However, the difference is not that much, usually between £10 to £20 more than copper cables of the same length. Thankfully, the price of fibre optics has come down a lot in the past few years, it used to be well out of the average person’s budget.

Secondly, almost all fibre optic HDMI cables are one-way. What that means is one side (the appropriate ends are usually labelled as “Display” and “Source”) needs to be connected to the item on the label. Unlike regular HDMI cables, they’re not backwards compatible, so you need to make sure you plug them in the right direction.

Other than that, if you need the longest and most stable HDMI cable, I would pick a fibre optic cable. In the long-run, the investment is well worth it.

Wrapping it Up

Overall, if you need to run an HDMI cable over long distances, I recommended looking for an active fibre optic HDMI cable. Otherwise, you can use separate HDMI cables connected through HDMI repeaters.

Just remember, at long distances, you shouldn’t expect absolutely perfect performance. The visuals might be okay but you could encounter input lag and other issues. Generally, for media-watching, it’s not a problem.






Was this article helpful?

Yes No

How can we improve it?


We appreciate your helpul feedback!

Your answer will be used to improve our content. And you can help other readers too 🙂

Follow us on social media:

Facebook Pinterest
About S. Santos

👋 I'm a technology columnist and blogger with over 10 years of experience, currently serving as Blue Cine Tech's AV Editor. Specialising in gadgets, home entertainment, and personal technology, my work has been featured in top technology blogs. I'm dedicated to breaking down the complexities of the latest tech trends, from explaining the intricacies of Dolby Vision to optimising your streaming experience. This blog serves as a platform for my ongoing exploration of the ever-evolving tech landscape. If you see me at industry events like CES or IFA, feel free to say hello.

8 thoughts on “HDMI maximum Length: How Far Can an HDMI Cable Go?”

  1. There is no mention of fibre optic HDMI cables on this article, which far outperforms all cables listed here. Please update your article. Thanks!

  2. What about Active Fiber Optic HDMI cables? My understanding is they can be used for much longer runs without the need for an HDMI repeater.

  3. Hello dear.
    If active fiber optic cables are one-way, then what about Ethernet support?
    In fact not all wires in such cable are from fiber but usually just high speed TMDS lines need it. Other things like CEC/DDC is a low I2C bus usually so can be transmitted by integrated copper wires inside AOC, but not sure about other limitation like Ethernet link.

    • The high-bandwidth conductors in AOC that are responsible for the video signal are converted to an optical signal, while the remaining conductors are copper.

  4. Thank you for the explanation,
    i just wrong buy HDMI cable for my UHD TV.

    i think my TV was broken before, then i know that i choose the wrong HDMI cable.
    that i need is High Speed type HDMI cable with 3 meters lengths

  5. I had problems with my TV screen going black randomly. After researching the solution was a bad HDMI cable. I replaced the cable with a 6 ft. HDMI cable supplied by my cable provider that had the certification tag on the cable and the package “Ultra High Speed HDMI Certification”. Scanning the tag took me to this site, https://www.hdmi.org/spec21sub/ultrahighspeedcable
    While this cable solved the problem it only lasted approximately 6 months and the problem returned. It seemed to happen only during certain broadcasts, the channel made no difference (failure due to not being able to handle the amount of information?).
    I replaced this cable today 9/27/21, with a 3.3 ft. cable (QVS brand) I dug out of the bottom of a computer junk drawer. It has no certification tags at all. The first thing that both my wife and I noticed was a more vivid colors and better resolution.
    One other thing I noticed on the older cables is reseating the connection temporarily helps.
    So should we go to a secure connection with thumb screws like on DVI-D connections?
    The typical consumer probably wouldn’t buy it.
    One other thought about the gold plated connections. Are they really needed for indoor use? Gold is a soft metal so it does wear faster making for a poor connection. Gold is used for it’s anti corrision properties. What about silver plated connections, The conductivity of silver is only 6% better than copper, but when the surface oxidizes, silver oxide is a much better conductor than copper oxide. Silver oxide is the only oxide (that we know of) that is conductive.


Leave a Comment